How To Make Dekorative Beton Curbing


How To Make Dekorative Beton Curbing

Was Sie brauchen Dekorative Betoneinfassungen verleihen Ihrem Garten den letzten Schliff. Gehwege, Blumenbeete und Antriebe, die mit einem Standardbetonkranz gesäumt sind, sehen intelligenter aus. Extrusionsmethode Sie können eine Extrusionsmaschine mieten, die einen Betonstein mithilfe eines Profilmusters erstellt.


Was Sie brauchen

Dekorative Betoneinfassungen verleihen Ihrem Garten den letzten Schliff. Gehwege, Blumenbeete und Antriebe, die mit einem Standardbetonkranz gesäumt sind, sehen intelligenter aus.

Extrusionsmethode

Sie können eine Extrusionsmaschine mieten, die einen Betonstein mithilfe eines Profilmusters erstellt. Diese Maschinen werden einen Randstein von fast beliebiger Länge extrudieren.

Formverfahren

Es ist möglich, Styroporformen in Längen zu kaufen, die ein Muster in einem Betonblock erzeugen, der in einer Holzform geformt wird. Der Styropor ist auf einer Seite oder auf beiden Seiten einer Holzform montiert, um einen asymmetrischen Bordstein oder einen symmetrischen Bordstein zu erzeugen.

Schritt 1 - Entwerfen Sie Ihre Curb Stone Formen

FĂĽr eine ziemlich Standard Landschaft Curb Stein versuchen Sie eine Form 18 Zoll lang von 8 Zoll breit und 8 Zoll hoch. Dies ist leicht aus Zoll dickem Holz gefertigt und kann zusammengenagelt werden.

Schritt 2 - Bauen Sie die Panzersteinformen

Die Basis der Form wird 18 Zoll lang und 8 Zoll breit sein. Nagel eine Seite an die Basis mit zwei Zoll Nägel etwa 3 Zoll voneinander entfernt. Nagel die beiden Enden der Form zur Seite und Basis mit 2-Zoll-Nägel etwa 3 Zoll voneinander entfernt.

Schritt 3 - Befestigen Sie die zweite Seite

Die Form ist jetzt eine Box mit einer fehlenden Seite. Befestigen Sie die zweite Seite mit zwei Inch-Schrauben etwa 4 Zoll voneinander entfernt. Ihre Form schlieĂźt jetzt einen Bereich ein, der 18 Zoll lang durch 8 Zoll breit und 8 Zoll tief ist. Mache mindestens zehn dieser Formen, um den Prozess zu beschleunigen.

Schritt 4 - Färben Sie das Innere der Formen mit Öl

Sie mĂĽssen die Formen wasserdicht machen und den Beton auch davon abhalten, an ihnen zu kleben. Leichtes Ă–l ist am besten, aber jedes Ă–l, das das Holz absorbieren wird, wird tun.

Schritt 5 - Setzen Sie den Styropor

Platzieren Sie eine 18-Zoll-Länge des Styropor entlang einer Seite der Form für einen asymmetrischen Stein oder beide Seiten für einen symmetrischen Stein.

Tun Sie dies mit jeder Holzform.

Schritt 6 - Mischen Sie den Beton

Mischen Sie den Beton zu einer festen Konsistenz und fĂĽllen Sie jede Form, um sicherzustellen, dass sich das Styropor nicht bewegt. Richten Sie die Oberseite des Betons aus.

Schritt 7 - Lassen Sie den Beton 24 Stunden trocknen

Nachdem der Beton mindestens 24 Stunden getrocknet ist, ist es Zeit, den Stein aus der Form zu entfernen. Die Steine ​​sollten leicht aus den Formen herauskippen. Wenn nicht, entfernen Sie die Seite der Form, die mit Schrauben ausgestattet ist, um den Stein zu entfernen. 7 Tage lang gründlich trocknen lassen und gelegentlich mit Wasser besprühen.

Schritt 8 - Wiederholen Sie

Wiederholen Sie den Vorgang, bis Sie genug Steine ​​gemacht haben.

Der Styropor haftet an den Steinen und muss abgekratzt werden, aber er schützt die Steine, während Sie mit ihnen umgehen, um Ihren Bordstein zu bauen.

How To Make Dekorative Beton Curbing

FAQ - 💬

❓ How do you make homemade concrete curbing?

👉 2:276:26Curb It Yourself 1Start of suggested clipEnd of suggested clipFollow the area that you want. And you see the curves start to take place and it takes some reallyMoreFollow the area that you want. And you see the curves start to take place and it takes some really wet really wet cement. And just touch it right in this.

❓ What type of cement is used for curbing?

👉 Portland cementThere are two (2) basic material formulas for decorative curbing. The most commonly used mix is referred to as "curb mix". This mix resembles mortar in that it is comprised of sand, Portland cement, fiber and water.

❓ How do you mix concrete for curbing?

👉 0:474:10Landscape curbing - Sand to Portland Ratio for curbing. Borderlineusa.comYouTubeStart of suggested clipEnd of suggested clipWe don't use buckets a lot of guys will you know want to use buckets because they're going to get anMoreWe don't use buckets a lot of guys will you know want to use buckets because they're going to get an exact measurement. And that's fantastic. It takes so much time.

❓ How thick should curbing be?

👉 You can go as wide as you like, but the strongest concrete edging is at least 3½ inches wide and deep. Additionally, at least two inches of that depth should be below the surface of the soil; this below-grade portion holds the border securely in place.

❓ How do I build a concrete curb edge?

👉

  1. STEP 1: Decide on the placement of your concrete garden edging. ...
  2. STEP 2: Dig and tamp the soil where you'll pour the concrete. ...
  3. STEP 3: Stake outside the border. ...
  4. STEP 4: Create your concrete mold. ...
  5. STEP 5: Insert spacers to keep the edging an even width. ...
  6. STEP 6: Mix and pour your concrete.

❓ How deep should a concrete curb be?

👉 12.04. 040 Curb and gutter dimensions.

(1) Back wall of curb in height12 inches
(3) Curb face in height6 inches
(4) Curb face slope in six inches1/2 inch
(5) Curb face and apron radius1 inch
(6) Gutter width18 inches

❓ What is the strongest concrete mix?

👉 C40 concrete is the strongest and most durable mix and for good reason townhomes for sale san diego. It can handle almost any abuse, including withstanding corrosion, making it ideal for farm-based and laboratory environments.

❓ Do concrete curbs need rebar?

👉 Reinforcing steel in concrete curbs is not usually necessary or recommended if correct jointing is used. However, if formed curbs are to be reinforced with steel bars, the bars should be positioned and secured within the forms so that they will not be displaced during placement and consolidation of the concrete.

❓ What is the best material for concrete forms?

👉 Timber is the most commonly used material for formwork. This is because timber is cost-effective, lightweight, durable, and flexible, allowing the concrete to shift while it sets without pieces breaking off or putting strain on the formwork.

❓ Do you need rebar in a concrete curb?

👉 Reinforcing steel in concrete curbs is not usually necessary or recommended if correct jointing is used. However, if formed curbs are to be reinforced with steel bars, the bars should be positioned and secured within the forms so that they will not be displaced during placement and consolidation of the concrete.

❓ What happens if you put too much cement in concrete?

👉 First, mortars with high cement content have greater shrinkage and more frequent shrinkage cracks. Shrinkage cracking often takes the form of evenly spaced vertical cracks in bed joints and evenly spaced horizontal cracks in head joints.

❓ What can decorative concrete curbing do for your garden?

👉 Decorative concrete curbing can add that finishing touch to your garden. Footpaths, flower beds, and drives lined with a standard concrete curb have a finished look. You can hire an extrusion machine that will create a concrete curb using a profile pattern. These machines will extrude a curb of just about any length.

❓ What size molding do I need for Curb Stone?

👉 For a fairly standard landscape curb stone try a mold 18 inches long by 8 inches wide by 8 inches high. This is easily made from 1 inch thick timber and can be nailed together.

❓ What size nails do you use for Curb Stone?

👉 For a fairly standard landscape curb stone try a mold 18 inches long by 8 inches wide by 8 inches high. This is easily made from 1 inch thick timber and can be nailed together. The base of the mold will be 18 inches long by 8 inches wide. Nail one side to the base using 2 inch nails about 3 inches apart.

Videos In Verbindung Stehende Artikel: Curb Master: Continuous Concrete Curb Edging.